| Leopard 2 | |
|---|---|
Leopard 2A5 of the German Army (Heer) (data for 2A6) |
|
| Type | Main battle tank |
| Place of origin | West Germany |
| Service history | |
| In service | 1979-present[1] |
| Used by | See Operators |
| Wars | Kosovo War, War in Afghanistan |
| Production history | |
| Designer | Krauss-Maffei |
| Designed | 1970s |
| Manufacturer | Krauss-Maffei Wegmann Maschinenbau Kiel |
| Unit cost | 2A6: US$5.74 million (2007)[2] |
| Produced | 1979-present |
| Variants | See Variants |
| Specifications | |
| Weight | 62.3 tonnes (61.3 long tons; 68.7 short tons) |
| Length | 9.97 m (393 in) (gun forward) |
| Width | 3.75 m (148 in) |
| Height | 3.0 m (120 in) |
| Crew | 4[1] |
|
|
|
| Armour | 3rd generation composite; including high-hardness steel, tungsten and plastic filler with ceramic component. |
| Main armament |
1 x 120 mm Rheinmetall L55 smoothbore gun[1] 42 rounds |
| Secondary armament |
2 x 7.62 mm MG3A1[1] 4,750 rounds |
| Engine | MTU MB 873 Ka-501 liquid-cooled V-12 Twin-turbo diesel engine 1,500 PS (1,479 hp, 1,103 kW) at 2600 rpm |
| Power/weight | 24.1 PS/t (17.7 kW/t) |
| Transmission | Renk HSWL 354 |
| Suspension | Torsion-bar suspension |
| Fuel capacity | 1,200 liters[3] |
| Operational range |
550 km (340 mi) (internal fuel)[1] |
| Speed | 72 km/h (45 mph)[1] |
|
||||||||||||||||||||
|
||||||||||||||||||||
|
||||||||||||||||||||||||||||||||||||||||||||
The Leopard 2 is a main battle tank developed by Krauss-Maffei in the early 1970s for the West German Army. The tank first entered service in 1979 and succeeded the earlier Leopard 1 as the main battle tank of the German Army. Various versions have served in the armed forces of Germany and twelve other European countries, as well as several non-European nations. More than 3,480 Leopard 2s have been manufactured. The Leopard 2 first saw combat in Kosovo with the German Army and has also seen action in Afghanistan with the Danish and Canadian ISAF forces.
There are two main development batches of the tank, the original models up to Leopard 2A4 which have vertically-faced turret armour, and the "improved" batch, namely the Leopard 2A5 and newer versions, which have angled arrow-shaped turret appliqué armour together with a number of other improvements. All models feature digital fire control systems with laser rangefinders, a fully stabilized main gun and coaxial machine gun, and advanced night vision and sighting equipment (first vehicles used a low-light level TV system or LLLTV; thermal imaging was introduced later on). The tank has the ability to engage moving targets while moving over rough terrain.
Contents |
Even as the Leopard 1 was entering service in 1965, an up-gunned version with the new Rheinmetall L44 120 mm gun was being considered to keep pace with newer Soviet designs, but this was cancelled in favour of the MBT-70 "super-tank" project developed jointly with the United States. The MBT-70 was a revolutionary design, but after large cost overruns, Germany withdrew from the project in 1969.
Work on a national development was started in 1970 by Krauss-Maffei. A year later, a choice was made for it to be based on the earlier Experimentalentwicklung (later named Keiler) project of the late sixties (itself derived from the vergoldeter Leopard or "gilded Leopard"), instead of being a modified MBT-70 or Eber. The name of the design was determined in 1971 as "Leopard 2" with the original Leopard retroactively becoming the Leopard 1. Seventeen prototypes were ordered that year (only sixteen hulls were built). They had to have a maximum weight of fifty metric tons.
On 11 December 1974 a Memorandum of Understanding was signed with the USA for the possible joint production of a new MBT, after the Americans had bought and investigated prototype hull number seven in 1973. In view of the experiences in the Yom Kippur War a much higher level of protection was demanded than was implemented in the prototypes, that used heavily sloped spaced armour. The weight class was increased to sixty tons. Prototype turret number fourteen was changed to test a new armour configuration, and was turned into a blockier looking turret as a result of using vertical steel perforated armour; it already had been much more voluminous than the turret of a Leopard 1 because of a large internal ammunition storage locker in the rear bustle. The Leopard 2 thus initially used perforated armour, and not Chobham armour as is sometimes claimed. PT-14 used the 120 mm Rheinmetall gun (as eventually did the U.S. Abrams). After this, two new prototype hulls and three turrets were ordered, one (PT-20) mounting the original L7A3 105 mm gun and a Hughes fire control system, a second (PT-19) with the same fire control system but able to "swap out" the gun for the 120 mm Rheinmetall design (it was indeed so changed by the Americans), and one more (PT-21) mounting the Hughes-Krupp Atlas Elektronik EMES 13 fire control system, with the 120 mm gun.
In mid-1976 prototype 19 was assembled and shipped to the USA, together with hull number twenty and a special target vehicle to test the armour. The prototype was called Leopard 2AV (Austere Version) because it had a simplified fire control system. It arrived in the US by the end of August 1976, and comparative tests between the Leopard 2 and the XM1 (the prototype name for the M1 Abrams) prototypes were held from 1 September at Aberdeen Proving Ground, lasting until December 1976. The US Army reported that the Leopard 2 and the XM1 were comparable in firepower and mobility, but the XM1 was superior in armour protection. Today we know this was true as regards a hit by a hollow charge; but against KE-attack the Leopard 2 was almost twice as well protected as the original M1 (650 mm to 350 mm). Its more traditional multi-fuel turbodiesel engine was also more reliable, and provided similar performance with less fuel consumption, with more noise but a smaller heat signature. This type of engine also allowed for quick engine startups and shutdowns to prevent the need for long idling periods on the battlefield. Hull twenty was fitted with simulation weights; later it was discovered that these equalled only the weight of a turret without armour modules fitted, invalidating all performance data. After the comparative test the Leopard 2 hulls were returned to Germany for further evaluation, but turret 19 remained and was fitted to the hull of prototype seven, whilst its gun was changed for the 120 mm Rheinmetall. In tests until March 1977 it was found to be far superior to the 105 mm L7 mounted on the Abrams, which was confirmed by subsequent NATO tank gunnery contests.
Before tests had begun the United States had selected the Chrysler XM1 prototype for full development. In January 1977 Germany ordered a small pre-series of three hulls and two turrets, delivered in 1978. These vehicles had increased armour protection on the front of the hull. In September 1977 1800 Leopard 2 were ordered, to be produced in five batches. The first was delivered on 25 October 1979. The Dutch army had already rejected the M1 because of its high operating costs and the refusal by the Americans to fit a Dutch version with the 120 mm gun and instead ordered 445 Leopard 2s on 2 March 1979. The Swiss ordered 35 tanks on 24 August 1983 and started license production of 345 additional vehicles in December 1987. Thus hardly being a major export success in the 1980s (no tank of the latest generation was), the type became very popular in the 1990s, when the shrinking German army offered many of its redundant Leopard 2s at a reduced price. It became successful enough in Europe that the manufacturer started calling it the Euro Leopard, despite France, Britain, and Italy all operating their own MBTs. But with further non-European orders, the name "Global-Leopard" is now used instead.[4]
The Leopard 2 uses spaced, multi-layered composite armour throughout the design. The Leopard 2A5 and A6 models have additional armour added to the turret front, and on the hull and side skirts.[5] Estimated levels of protection for the Leopard 2 range from 590 - 690 RHAe on the turret, 600 RHAe on the glacis and lower front hull on the Leopard 2A4, to 920 - 940 RHAe on the turret, 620 RHAe on the glacis and lower front hull on the Leopard 2A6 against kinetic projectiles.[6] The mine-protected Leopard 2A4M and 2A6M adds an additional mine protection plate for the belly, which increases protection against mines and improvised explosive devices.[6] All Leopard 2 variants after the Leopard 2A6 include spall liners on the inside of the tank, protecting the crew.[6] The Leopard 2A6M CAN increases protection against rocket-propelled grenades (RPGs) by including additional slat armour.[7]
Two groups of 4 Wegmann 76 mm smoke mortars are mounted on either side of the turret and can be electrically fired either as single rounds or in salvos of four are mounted on most Leopard 2 models, with the exception of Dutch Leopard 2s, which are instead equipped with a Dutch-designed smoke mortar system with six barrels on each side.[6] Swedish Leopard 2s utilize French GALIX smoke dispensers, similar to the system found on the French Leclerc.[8]
The crew is also protected against Nuclear, Biological and Chemical (NBC) threats, as the Leopard 2 is equipped with a NBC overpressurization system which provides up to 4 mbar (0.004 kp/cm2) over-pressure inside the vehicle.[6]
The Leopard 2 is equipped with a fire protection system. Four 9 kg Halon fire extinguisher bottles are installed on the right behind the driver's station. The bottles are connected to pipes and hoses and are activated automatically by the fire detection system, when temperatures rise above 82°C (180 °F) inside the fighting compartment, or manually via a control panel in the driver's compartment.[6] An extra 2.5 kg Halon fire extinguisher is also stored on the floor beneath the main gun.
The primary armament for production versions of the Leopard 2 is the Rheinmetall 120 mm smoothbore gun, in either the L44 variant (found on all production Leopard 2's until the A5), or the L55 variant (as found on the Leopard 2A6 and subsequent models).[6] 27 rounds of the main gun ammunition are stored in a special magazine in the forward section of the hull, to the left of the driver's station, with an additional 15 rounds stored in the left side of the turret bustle, and separated from the fighting compartment by an electrically operated door.[6] If the ammunition storage area is hit, blow-off panels in the turret roof would direct an explosion upwards away from the crew compartment.[6] The gun is fully stabilized, and can fire a variety of types of rounds, such as the German DM-33 APFSDS-T anti-tank round, which is said to be able to penetrate 560 millimeters (22 in) of steel armour at a range of 2,000 meters (2,200 yd),[9] and the German DM12 multipurpose anti-tank projectile (MPAT).[10] For the L55 gun, a newer APFSDS-T round was introduced to take advantage of the longer barrel, the DM-53, which is said to be able to penetrate in excess of 810 mm of RHAe armour at a range of 2,000 meters.[6] The bore evacuator and the gun's thermal sleeve, designed to regulate the temperature of the barrel, are fabricated out of glass-reinforced plastic, while the barrel has a chrome lining to increase barrel life.[11] The main gun is capable of power elevating from +20° to −9°.[12]
Rheinmetall has developed an upgrade for Leopard 2 tanks to give them the ability to fire the LAHAT anti-tank guided missile through the main gun; the missile can engage targets out to a range of 6,000 metres (20,000 ft).[13]
The Leopard 2 is equipped with two machine guns, one mounted co-axially, the other on an anti-aircraft mount. On German models, the two machine guns are the MG-3 7.62 mm machine gun; on Dutch models, these two machine guns are FN MAG 7.62 mm machine guns, and on Swiss models, they are Swiss MG 87 7.5 mm machine guns.[6] 4750 rounds of machine gun ammunition are carried on board the Leopard 2.
The standard fire control system found on the Leopard 2 is the German EMES 15 fire control system with a dual magnification stabilized primary sight. The primary sight has an integrated Neodymium Yttrium Aluminium Garnet (Nd:YAG) solid state laser rangefinder and a 120 element cadmium mercury telluride, CdHgTe (also known as CMT) Zeiss thermal sight which are both linked to the tank's fire control computer.[14] A backup 8x auxiliary telescope FERO-Z18 is mounted coaxially for the gunner.[6] The commander has an independent periscope, the Rheinmetall/Zeiss PERI-R 17 A2. The PERI-R 17 A2 is a stabilised panoramic periscope sight designed for day / night observation and target identification, and it provides an all round view with a traverse of 360°.[14] The thermal image from the commander's periscope is displayed on a monitor inside the tank. Initial production tanks were not equipped with a thermal sight, due to the sight being not ready, and instead temporarily substituted the PZB 200 low light TV system (LLLTV).[6]
The fire control suite is capable of providing up to three range values in four seconds. The range data is transmitted to the fire control computer and is used to calculate the firing solution. Also, because the laser rangefinder is integrated into the gunner's primary sight, the gunner is able to read the digital range measurement directly. The maximum range of the laser rangefinder is just less than 10,000 m with a measuring accuracy to within 20 m at this range.[14] The combined system allows the Leopard 2 to engage moving targets at ranges of up to 5,000 meters whilst itself being on the move over rough terrain.
The Leopard 2 is propelled by the MTU MB 873 diesel engine, which provides 1,100 kW (1,500 hp). The MTU MB 873 diesel engine is a four-stroke, 47.6 litre, 12-cylinder multi-fuel, exhaust turbo-charged, liquid-cooled engine. The engine is a multi-fueled design, has a fuel consumption that is estimated at around 300 litres per 100 km on roads and 500 litres per 100 km across country, and is coupled to the Renk HSWL 354 gear and brake system.[6][14] The Renk HSWL 354 transmission has 4 forward, 2 reverse gears with a torque converter and is completely automatic, with the driver selecting the range.[6] The Leopard 2 has 4 fuel tanks, which have a total capacity of approximately 1,160 litres, giving a maximum road range of about 500 km.[6] Together, the propulsion pack is capable of driving the Leopard 2 to a top road speed of 68 km/h (which is limited to 50 km/h during peacetime), and top reverse is 31 km/h.[6] The power pack can be changed in the field in 15 minutes.[6] The engine and transmission is separated from the crew compartment through a fireproof bulkhead.[14] An enhanced version of the EuroPowerPack, with a 1,210 kW (1,650 hp) MTU MT883 engine has also been trialled by the Leopard 2.[14]
The Leopard 2 has a torsion bar suspension, and has advanced friction dampers. The running gear consists of seven dual rubber-tyred road wheels and four return rollers per side, with the idler wheel at the front and drive sprocket at the rear.[6] The tracks are Diehl 570F tracks, with rubber-bashed end connectors, which have removable rubber pads and use 82 links on each track. For use in icy ground, up to 18 rubber pads can be replaced by the same number of grousers, which are stored in the vehicle's bow when not in use.[6] The upper part of the tracks are covered with side skirts, with the first two road wheels and idler covered by an armoured skirt.[12]
The Leopard 2 can drive through water 4 meters (13 ft) deep using a snorkel or 1.2 meters (3 ft 11 in) without any preparation and climb vertical obstacles over one metre high.
In September 1977, the German Ministry of Defence decided to go ahead with plans for production of 1,800 Leopard 2s, to be delivered in five batches. Krauss-Maffei was again chosen as the main contractor, but this time Maschinenbau Kiel (MaK), of Kiel would be a major (45%) subcontractor. Deliveries started in 1979, and by 1982 the first batch of 380 Leopard 2; 209 by Krauss-Maffei (Chassis Nr. 10001 to 10210) and 171 by Mak (Chassis Nr. 20001 to 20172) was completed. The earliest of these were fitted with an image intensifier, the last 80 with a new thermal night-sight system, and this was later retrofitted to the earlier models.
The first export customer were the Netherlands which received 445 vehicles between July 1981 and July 1986.[15] The Netherlands later resold 114 of these (and one turret) to Austria, 80 to Canada in 2007,[16] another 52 tanks to Norway and finally 37 to Portugal. Sweden also acquired 280 Leopards, 160 2A4s from German stocks, designated Stridsvagn 121, and the rest Leopard 2(S) models (designated Stridsvagn 122) similar in configuration to the Leopard 2A5 variant. Spain first leased and later bought 108 2A4 models in the interim period before 219 license-built Leopard 2A6 models (Leopard 2E) were ready to replace them. Switzerland bought 380 between 1987 and 1993. A number of countries also use versions of the tank, including Poland, Denmark, Finland, Greece (license-built Leopard 2Hel), Turkey and Chile. Germany has fielded about 2,125 Leopard 2s in various versions. The design was also tested by the UK in the 1980s, which ultimately decided on the Challenger 1. The Australian Army evaluated ex-German Leopard 2s as a replacement for its Leopard 1 tanks in 2003 but instead selected the M1A1 Abrams.
The German contingent of the Kosovo Force operated a number of Leopard 2A4s and 2A5s in Kosovo.
In October 2003, Canada was planning to replace its Leopard C2s with wheeled Stryker Mobile Gun Systems. However, operational experience in Afghanistan, and in particular during Operation Medusa, convinced the Canadian military of the usefulness of maintaining a tank fleet.[17] Leopard C2s were deployed to Kandahar in December 2006,[18] but they were by then almost 30 years old, and were nearing the end of their operational life. The Canadian government decided to borrow 20 Leopard 2A6s and three armoured recovery vehicles from Germany for rapid deployment to Afghanistan. In late August 2007, the first Leopard 2s were airlifted into Afghanistan to equip Lord Strathcona's Horse (Royal Canadians).[19]
In an assault on November 2, 2007, a Leopard 2A6M hit an IED and survived without casualties: “My crew stumbled upon an IED (improvised explosive device) and made history as the first (crew) to test the (Leopard 2A6) M-packet. It worked as it should.” wrote a Canadian officer in an email to German defence officials.[20] Canadian Chief of the Defence Staff General Rick Hillier denied reports that a Leopard II tank that was struck by an IED was a write-off, insisting that the tank has been repaired and is once again in use. “The Taliban have been engaged with some of the new Leopard II tanks in several ambushes” and that as a result the Taliban “learned some very harsh lessons” and lost the battle in question “very quickly and very violently.”[21]
In October 2007, Denmark also deployed its Leopard 2A5 DKs in support of operations in southern Afghanistan. The Danish tank unit, drawn from the first battalion of the Jydske Dragonregiment (Jutland Dragoons Regiment),[22] was equipped with three tanks and one M113 armoured personnel carrier, with an armoured recovery vehicle and another tank kept in reserve.[23] The Danish version of the Leopard 2A5 is fitted with Swedish-made Barracuda camouflage mats, that serve to limit the absorption of solar heat, thus reducing infrared signature and interior temperature.[22] It also has a conventional driver's seat bolted on the floor of the tank, wherereas in the Canadian 2A6M (as part of the mine-protection package) the driver's seat has been replaced by a "Dynamic Safety Seat",[24] which is a parachute-harness like arrangement that the driver wears around his hip. 6 large belts hold him in the right position. In this way, the driver does not have any contact with the hull except on the pedals and is out of the shockwave area of exploding land mines or IEDs.
In January 2008, Danish tanks halted a flanking maneuver by Taliban forces near the Helmand River by providing gunfire in support of Danish and British infantry from elevated positions.[25] On 26 February 2008, a Danish Leopard 2 was hit by an explosive device, damaging one track. No one was injured and the tank returned to camp on its own for repairs.[26] The first fatality suffered by a crew operating a Leopard 2 happened on 25 July 2008. A Danish Leopard 2A5 hit an IED in Helmand Province. The vehicle was able to continue 200 metres (656 ft) before it halted. Three members of the four-man crew were able to escape even though wounded, but the driver was stuck inside. On site treatment by Danish medics could not save him. The vehicle was towed to FOB Attal and then later to FOB Armadillo for investigation and possible redeployment. During the same contact with Taliban forces, a second tank was caught in an explosion but none of the crew were wounded.[27] Beginning on December 7, 2008, Leopard 2 tanks took part in Operation Red Dagger, firing 31 rounds in support of Coalition troops as they recaptured Nad Ali District. A press release from the British ministry of defence claimed the tanks were a decisive factor in the Coalitions success, and praised the accuracy of their fire and their mobility.[28]
The baseline Leopard 2, sometimes informally called the "A0" to differentiate it from later versions, was the first series manufactured version. The vehicles were manufactured from October 1979 until March 1982, altogether 380 vehicles. 209 were built by Krauss Maffei and 171 by MaK. The basic equipment consisted of electrical-hydraulic WNA-H22, a fire control computer, a laser rangefinder, a wind sensor, a general purpose telescope EMES 15, a panorama periscope PERI R17, the tower sight FERO Z18, on the tower roof as well as a computer controlled tank testing set RPP 1–8. 200 of the vehicles had a low-light enhancer (PZB 200) instead of a thermal imaging. Two chassis served as driver training vehicles.
A number of minor modifications and the installation of the gunner's thermal sight[1] was worked into the second batch of 450 vehicles Leopard 2 designated the A1; 248 by Krauss-Maffei (Chassis Nr. 10211 to 10458) and 202 by Mak (Chassis Nr. 20173 to 20347). Deliveries of the 2A1 models started in March 1982 and ended in November 1983. The two most notable changes were the modification of the ammunition racks to be identical to those in the M1 Abrams, and redesigned fuel filters that reduced refuelling time.
A third batch of 300 Leopard 2; 165 by Krauss-Maffei (Chassis Nr. 10459 to 10623) and 135 by MaK (Chassis Nr. 20375 to 20509.) 2A1's of the third batch were built between November 1983 and November 1984, which included more minor changes that were later retrofitted to the earlier 2A1's.
This designation was given to upgraded vehicles of the first batch of Leopard 2s, brought up to the standard of the second and third batches. This modernisation gradually replaced the original PZB 200 sights in the first batch with thermal sights for the EMES 15 as they became available. Furthermore the upgrade included the fitting of filler openings and caps to the forward hull fuel tanks to allow separate refuelling, as well as the addition of a deflector plate for the periscope and a large coverplate to protect the existing NBC protection system. Finally, the tank was given new five metre towing cables with a different position. The programme began in 1984 and ended in 1987; the third, fourth and fifth batches were during this period produced with the same features. The modernised first batch can be recognised by the circular plate covering the hole where the cross-wind sensor for the fire-control system was removed.[29]
The fourth batch of 300 vehicles; 165 by Krauss-Maffei (Chassis Nr. 10624 to 10788) and 135 by Mak (Chassis Nr. 20510 to 20644) was delivered between December 1984 and December 1985. The main change was the addition of the SEM80/90 digital radio sets (also being fitted to the Leopard 1 at the same time), and the ammunition reloading hatches being welded shut. Even with these minor changes the new batch was known as the 2A3.
The most widespread version of the Leopard 2 family, the 2A4 models included more substantial changes, including an automated fire and explosion suppression system, an all-digital fire control system able to handle new ammunition types, and improved turret with flat titanium/tungsten armour.
The Leopard 2s were manufactured in eight batches between 1985 and 1992. All the older models were also upgraded to 2A4 standard. Until 1994 Germany operated a total of 2,125 2A4s (695 newly built and the rest modified older versions), while the Netherlands had an additional 445 tanks. The 2A4 was also license manufactured in Switzerland as the Panzer 87 "Leopard" or Pz 87. This version included Swiss-built 7.5 mm Mg 87 machine guns and communications equipment, and featured improved NBC protection system. Switzerland operated 380 Pz 87 tanks.
Germany and the Netherlands found themselves with large stocks of tanks they had no need for at the end of the Cold War. These tanks were sold to NATO or friendly armies around the world. Austria (114), Canada (107), Chile (140), Denmark (51), Finland (139), Greece (183), Norway (52), Poland (128), Portugal (37), Singapore (96) Spain (108), Sweden (160), and Turkey (339) were among the buyers of the surplus tanks.
The Pz 87WE (WertErhaltung) is a Swiss modification and upgrade of the Pz 87.[30] The modification significantly improves protection through the addition of the Leopard 2A6M's mine protection kit, thicker armour on the front glacis, and a turret equipped with a Swiss-developed armour package using titanium alloy. The turret roof armour is improved and the smoke grenade launchers redesigned. Further improvements enhance survivability and combat capability, such as a turret electric drive similar to the Leopard 2A5, a driver rear-view camera, an independent weapons station for the loader, and enhanced command and control systems. The fire control system is also upgraded, using the Carl Zeiss Optronics GmbH PERI-R17A2 fire control system. A remote weapons station containing a fully stabilized Mg 64 0.50 calibre machine gun is also fitted to the tank.
The Pz 87-140[31] is an experimental variant of the Swiss Pz 87 with a 140 mm gun and an additional armour later used on the newer production variants.
The Leopard 2A4CHL is the upgraded Chilean version of the Leopard 2A4 ordered by Chile in 2007. Upgrades include new electronics, sighting and information systems meant to elevate the Leopard 2A4's networking capability to be equal to that of the Leopard 2A6, a new suspension system and the upgrading of the tanks main gun to the L55 smoothbore cannon used on the Leopard 2A6. Other upgrades are remote weapon stations over the gunner and commander hatches fitted with the MG3 and HK GMG. The Leopard 2A4CHL also has improved roof and side turret armour and can be uplinked with Chile's battlefield control network.
The Leopard 2A4M CAN is the upgraded Canadian version of the Leopard 2A4 acquired from the Royal Netherlands Army surplus. The Leopard 2A4M CAN is specially designed for the war in Afghanistan, based on experience gained by Leopard 2 operators. The first 20 were delivered in October 2010 and are being deployed to Afghanistan.[32] Though originally planned to be up-gunned to the L55 for consistency with the 2A6M CAN, the longer barreled guns (optimized for tank-vs-tank warfare) were found to be less than ideal in Afghanistan, therefore it was decided to retain the L44. In addition, only small areas of slat armour were added, in contrast with the fully caged 2A6M CANs. The protection of the Leopard 2A4M CAN has been further augmented with the addition of applique armour resembling that found on the most recent Leopard 2A7+ variant, but modified to fit the turret configuration of the 2A4.[33] Of the remaining ex-Dutch Leopards, Canada will upgrade 42 for training use (though whether they will be fully upgraded to 2A4M CAN standards is uncertain) and convert 18 to Armoured Engineering Vehicles (13 firm and 5 options). Canada has also purchased 15 2A4s from Germany as Logistic Stock Vehicles (for spare parts), and in February 2011 bought 12 2A4s/Pz 87 from the Swiss to be converted to "support vehicles" (likely Armoured Recovery Vehicles).
The Leopard 2NG (Next Generation) is a privately funded Turkish upgrade by Aselsan that includes the application of more armour (AMAP), upgraded optics and a new fire control system on the work since 1995 and to be delivered by late 2011. It was developed without an order of the Turkish Army, but might meet the requirements for the modernization of 298 Turkish Leopard 2A4.[34] The old powerpack and the L/44 gun barrel are kept, but the combat weight is increased to 65 tonnes.[34] According to the Turkish news sources, Finland is interested in getting the Turkish upgrade package to modernize their fleet of Leopard 2A4s.[35][36][37]
The A5 introduced a wedge-shaped, spaced add-on armour to the turret front and the frontal area of the sides. These armour modules defeat a hollow charge prior to reaching the base armour. The spaced armour is also designed to affect kinetic-energy penetrators by forcing them to change direction and eroding them in the process; it does not form a shot-trap since it doesn't deflect the penetrators outwards to hit the hull or turret ring. The gun mantle was redesigned to accept the new armour. There were also some improvements in the main armour composition. The tank interior received spall liners to reduce fragments if the armour is penetrated. The frontal "heavy" third of the side skirts was replaced with a new, stronger type. The commander's sight was moved to a new position behind the hatch and it received an independent thermal channel. The gunner's sight was moved to the turret roof as opposed to the cavity in the front armour in previous models. A new heavier sliding driver's hatch was fitted. Turret controls went all-electric, increasing reliability and crew safety, and producing some weight savings. The gun braking system was improved to prepare for the later mounting of the new L55 gun tube and to enable firing of more powerful ammunition, such as the DM-53 APFSDS. The A5 entered service in the German tank battalions in mid-1998.
The Leopard 2(S) is a Swedish Army variant of the Leopard 2A5, which has received the local designation Strv 122. It is based on what was then called "Leopard 2 Improved" and features increased armour on the turret top and front hull, and improved command, control and fire control systems. Externally, the vehicle can be distinguished from the Leopard 2A5 by the French GALIX smoke dispensers, different storage bins, and the much thicker crew hatches.[8] The Strv 122B, a variant equipped with modular AMAP composite armour from IBD Deisenroth, has increased 360° protection against threats like EFPs, RPGs and IEDs.[38] The width of exactly 4 metres (13 ft) has been kept, while the weight increases by only 350 kilograms (770 lb).[38]
The Leopard 2A5 DK is a variant of the Leopard 2A5 similar to the Leopard 2A6 with some small modifications, used by the Danish Army.
Includes the addition of the Rheinmetall 120 mm L55 smoothbore gun and a number of other changes. All German tank battalions of the "crisis intervention forces" are equipped with the A6, as are all Dutch operational units. Canada purchased 20 Leopard 2A6s from the Netherlands. These were delivered in 2007.[39] Portugal also purchased 37 Leopard 2A6 from the Dutch in 2007, with delivery in 2008.
The Leopard 2A6M is a version of the 2A6 with enhanced mine protection under the chassis, and a number of internal enhancements to improve crew survivability.[40] Canada has borrowed 20 A6Ms from Germany for deployment to Afghanistan in late summer 2007. The new tanks all have turret electric drive.
The Leopard 2A6M CAN is a Canadian variant of the Leopard 2A6M. Significant modifications include distinctive black boxes mounted on the rear of the turret bustle, originally expected to be the new air conditioning unit but instead likely contains Canadian Forces designated communications gear (as they lined up with the new antennae stands),[41] and stand-off slat armour.[42] The first tanks configured in this variant are the twenty tanks loaned from the German Bundeswehr, in an effort to increase firepower and to increase protection given to Canadian troops operating in the south of Afghanistan. The loaner tanks are expected to retain their German MG3 machine guns, while the ex-Dutch tanks are expected to retain their FN MAG machine guns due to commonality with existing Canadian stocks.[43] Due to the loaned status of the first 20 tanks, the air conditioning unit originally could not be installed as only minimal changes could be made (instead, the crew wore cooling vests, and the turret's electric drive generates less heat than the hydraulic drive of Canada's older Leopard C2). The loaned German tanks will now be kept by the Canadian Forces and may be upgraded even further, while the ex-Dutch Leopard 2A6's were modified to German Leopard 2A6M's specifications and used as restitution for the loaned tanks.[44] Currently, Canadian Leopard 2's in Afghanistan have since been fitted with an air conditioning unit, and the Saab Barracuda camouflage mats which also serve to reduce solar loading by 50 percent.[7]
The Leopard 2 Hel is a derivative of the 2A6, ordered by the Greek Army in 2003. The "Hel" stands for "Hellenic". The 170 tanks were to be delivered between 2006 and 2009. A total of 140 will be built in Greece by ELBO, which delivered the first units in late 2006.[45]
The Leopard 2E is a derivative of the 2A6, with greater armour protection,[46] developed under a program of co-production between the defence industries of Spain and Germany. The program was developed within the frame of collaboration decided in 1995 between the Defence Ministries of both countries, in which also was included the cession of use by a period of five years of 108 Leopard 2A4 from the German Army to the Spanish Army. However, this cession was extended up to 2016, and after that those tanks will be the sole property of the Spanish Army, as has been made public on 24 January 2006, then having been paid a total of 15,124,014 euros in ten yearly installments, giving the Spanish co-ownership from 2006. In 1998, the Spanish government agreed to contract 219 tanks of the Leopard 2E line, 16 recovery tanks Leopard 2ER (Bufalo) and 4 training vehicles. They chose Santa Bárbara Sistemas as the main contractor. The program, with a budget of 1,939.4 million Euros, includes also the integrated logistical support, training courses for crew instructors and maintenance engineers and driving, turret, maintenance, aiming and shooting simulators. Deliveries of the first batch began in 2004 and should complete in 2008.
This new variant Leopard 2 PSO (Peace Support Operations) is designed specially for urban warfare, which had been encountered in peacekeeping operations with increasing frequency. Therefore the Leopard 2 PSO is equipped with more effective all-around protection, a secondary weapons station, improved reconnaissance ability, a bulldozer blade, a shorter gun barrel, non-lethal armament, close-range surveillance ability (through camera systems), a searchlight and further changes to improve its perseverance and mobility, not too dissimilar to the Tank Urban Survival Kit for the American M1A2 Abrams.
The Leopard 2A7+ was first shown to the public during the Eurosatory 2010, featuring the label "Developed by KMW - tested and qualified by German MoD". The Leopard 2A7+ has been tested by the Bundeswehr under the name UrbOb (urban operations). The planned upgrade of 50 German Leopard 2s to Leopard 2A7+ was to start in 2012.[47]
The Leopard 2A7+ is designed to operate in low intensity conflicts as well as in high intensity conflicts.[48] The tank's protection has been increased by modular armour; the frontal protection has been improved with a duel-kit on the turret and hull front, while 360° protection against RPGs and mine protection increase the survivability of the tank in urban operations.[48] It can fire programmable HE munition and the turret mounted MG3 has been replaced with a stabilized FLW 200 remotely controlled weapon station. The mobility, sustainability and situational awareness have also been improved.[48]
On 2 July 2011 the Bundessicherheitsrat (Federal Security Council) announced that Germany wants to sell 200 Leopard 2A7+ to Saudi-Arabia. The intention encountered criticism in the Cabinet of Germany as well as the foreign media.[49][50] The deal was approved on 6 July 2011.[51]
As the 1990s began, Rheinmetall began developing a 140 mm smoothbore cannon as a future tank cannon. This was intended to counter new developments in Soviet-bloc armoured fighting vehicles, most especially persistent rumours that the next-generation Soviet main battle tank would be armed with either a 135 mm or 152 mm cannon. This program was contemplated as the third stage in the KWS program of modernizing Leopard 2 tanks. KWS I was the replacement of the L44 120 mm cannon with the 55-calibre model, KWS II was a modernization program that became the Leopard 2A5, and KWS III was the development of a new turret including a 140 mm smoothbore weapon system and an automatic loader, which would have resulted in the reduction of the crew size to 3 soldiers. The final project design contained a lateral loading mechanism and had the main gun moved in the left turret side. Ammunition load for the main gun was 32 rounds, which were stored in a large ammunition bunker, covering the full turret rear. Moving the ammunition out of the crew’s compartment would have resulted in a higher survivability in case of a penetration. The planned protection level was to be equal to the Leopard 2A5 or better. Command and control of the tank was supposed to be improved by the introduction of the ISIS system in its latest version. The KWS III was not adopted then, but development continued on the 140 mm weapon system, with Rheinmetall coordinating with Royal Ordnance from the UK and GIAT from France. To test out the weapon’s capabilities, the 140 mm gun was mounted to a Leopard 2. The tank was not equipped with the new turret armour of the KWS III improvement program, nor with an automatic loader, and it also still had the electro-hydraulic turret drive. To cope with the extra weight of the main gun, counterweights were added to the turret rear. The tests were partially successful, with the gun showing superior penetration power, but also some difficulties with the handling.[52]
| Description | Leopard 2A4 | Leopard 2A5 | Leopard 2A6/A6M | ||||||
|---|---|---|---|---|---|---|---|---|---|
| Crew: | 4 | ||||||||
| Engine: | MTU-12-cylinder-Diesel engine MB 873-Ka 501, with two exhaust turbochargers. | ||||||||
| Capacity: | 47,600 cm3, Rpm: 2,600/min | ||||||||
| Power output: | 1,500 PS (1,479 hp, 1,103 kW) | ||||||||
| Transmission: | Hydro-mechanical control, reversing and steering gear HSWL 354 with combined hydrodynamic-mechanical service brake, 4 forward, 2 reverse | ||||||||
| Suspension system: | Torsion bar spring mounted support roller drive with hydraulic dampers. | ||||||||
| Length Turret forward: |
9,670 mm | 10,970 mm | |||||||
| Width: | 3,750 mm | ||||||||
| Height: | 2,990 mm | 3,030 mm | |||||||
| Ground clearance: | 540 mm | ||||||||
| Wading depth without preparation: | 1,200 mm | ||||||||
| Wading depth with snorkel: | 4,000 mm | ||||||||
| Trench passability: | 3,000 mm | ||||||||
| Climbing ability: | 1,100 mm | ||||||||
| Empty weight: | 52 t | 57.3 t | 57.6 t A6M 60.2 t |
||||||
| Combat weight: | 55.15 t | 59.5 t | A6 59.9 t (Maximum mass; 61.7 t), A6M 62.5 t |
||||||
| Maximum speed: | 68 km/h; backwards 31 km/h | ||||||||
| Fuel capacity: | 1,160 liters (limited to 900 liters when not in battle) | ||||||||
| Fuel consumption and operating range: |
Road: ca. 340 l/100 km, ca. 340 km |
||||||||
| Rotation time (360°): | 10 seconds | ||||||||
| Armament: | Rheinmetall 120 mm smoothbore gun L/44 and 2 machine guns | Rheinmetall 120 mm smoothbore gun L/55 and 2 machine guns | |||||||
| Turret weight: | 16 t | 21 t | |||||||
| Turret rotation time: | 360° in 9 seconds (electric) | ||||||||
|
|||||||||||||||||||||||||||||
